可充電型真空吸塵器充電輸入輸出測試(doc 3頁)

可充電型真空吸塵器充電輸入輸出測試內容提要：
1.0 Purpose / 目的
To measure the charging input/output of the charger when the sample is in recharging.
評估可充電型樣機的充電器在充電過程中其輸入輸出是否符合安全要求.
2.0 Definition/概念:
2.1 Discharge-Operate the sample no longer to operate with the switch in the“on” position for an additional hour.
電池完全放電-運行樣機直到其完全停止,再保持開關處在開的位置上多一個小時
2.2 Recharge-Charge the discharged sample for 16 hours through the charger connected to supply mains of 120V/60Hz.
充滿電-讓電池完全放電的樣機通過充電器接上120V/60Hz電源充電16小時.
3.0 Reference Documents/參考文獻:
ULS-01017-DMLW-DataSheet-2001 Form Issued: 1992-07-01 Form Revised: 2006-07-07
4.0 Equipment/設備:
4.1 Frequency converter. (變頻電源)
4.2 Power analyzer(功率分析儀)
4.3 Datalogger&plug-type module(安捷倫Datalogger和通道插板)
4.4 J-type thermocouple wire. (J 型溫度線)
4.5 Sicomet99 & Parsec Activator.
4.6 UL test carpet.( UL 地毯)
..............................